Відео

Hello I have a longer Ray five 10 w laser trying to find out how to adjust height on framing..I have the width correct but the laser keeps going off the project on height. It will not frame what I need framed. Any help would be greatly appreciated. Thanks Larry

How do you measure the roller? From what to what?

Did you cherry plywood or solid wood?

Do you get to keep the machine when they send it to you for free?

Hi mister Louisiana! Great video and explanation but I don’t think the 30w upgrade is compatible with the 10w kit. Only commenting this as I got a 30w upgrade kit in a deal.. but no machine. Sort of got the Second half of the kit in a deal.

Thank you very much for your wonderful videos. Warm greetings from the Czech Republic

I've just got the omtech polar 350 and it had a built in fan but it also comes with a big external fan. The inside fan is load so I know a lot of owners have removed the build on fan and just use the external, note to reduce noise though I believe

I have been trying for 2 days to get a KERF setting for my new 40W laser - trying all the techniques on so many websites only to get totally frustrated because nothing changed. Your video made so much sense and within a few setting attempts, I was able to get a solid KERF for the 3 mm baltic birch I am using and a solid KERF for some Cast Acrylic I was trying out. Thank you so much for your videos - they are priceless!

Glass pane points would work also Rich

How often do you back up your prefs files or does it do it automatically

wallets. ? link doesn't work. not lightburn file

Thank you for this❤ I ordered mi e today but they dont have the purifier. Its sold out. Any other purifier that would be compatible for my machine?

I watched your short on 3D printing a custom exhaust port for the Roly. Can you pass on/sell the file? Thanks

Is there any way to make a recess/pocket in the capital letter so that the offset of the spelled out name will fit into it (going for a stacked layers)? I am trying to figure out how to do this without burning the offset portion that isn't part of the capital letter. By the way I just got my laser and your videos have been a great help with learning how to use it, so thank you for that.

you have Fahrenheit gauges!!

Another good advice 👍. Question, for every material thickness camera needs to be calibrated (Roly Laser)? why would the thickness matter if the alignment is referring to where the laser head is positioned?

Always love your presentations; great job on this video👍👏! I see you've been loyal to the Roly products and added a new addition, the LaserMatic XW. What is your opinion, and which do you prefer to use the most, the LaserMatic or WeCreat? I did watch your WeCreat video that you demonstrated 6 months ago, but now with the new XW, what is your preference? Also, did they upgrade the camera system to fit the wide format, or is it still the same camera as in the LaserMatic MK2? The only things I wish Roly would change are the laser head installation and the addition of autofocus. It is so difficult to remove the bottom right screw. Roly should have designed the laser head similar to xTool’s S1, with only two screws on top of the laser head to mount it. And, I never liked the LaserMatic gadget to measure the distance between the laser head and the material. xTool’s S1 autofocus and pinpoint system is one of the best I have ever seen. So, I was hoping Roly made some modifications with the new XW instead of just making it a wide format. Also, I find Roly support to be just outstanding. There isn’t anything I have seen with other lasers compared to Roly’s. WeCreat has to be the worst I’ve dealt with, and it is a growing trend among paying users. I had two LaserMatic's that had to be sent back. However, I can say that throughout the issues with both machines, Roly was there on Zoom doing their best to resolve the problems. Thank you.

Im using a diode laser to remove the silvering on the back of mirrors. I find that in offset fill mode the path traced out is more visible than in fill mode.

Thanks!

Fabulous... Nice and steady as u go even i can keep up 😅 best ever..

Thanks this is brilliant! How do yo make the grid in the first place on the screen and on the machine please?

Brilliant video tutorial! Many many thanks.

Is this how to make mandalas?

Well the new laser is not quite so ready for us newbies Fingered it out anyway!

Do you have a video of the 10w done this

Will removing the factory fan void my warranty? I've only had my Omtech Polar for a month.

Nice looking but how do I get it to work?

Thanks for this review, the thing is that when you say that it’s a good machine, it is a good machine. I just ordered one as an extra machine next to my 22W diode laser. Thanks again!

Interesting video Rich. What's the advantages of those 20 cuts, over for example cutting 1inch square, measuring the actual square, to get the difference between the 1inch on the sotware and then actual piece. Then divide by 2 to get the kerf? Thanks

I always have multiple problems..I used trace then saw broken lines (trace no longer available) so clicked the node and it did not give me labels yours did nor could I do anything with it. ltburn coverted from pdf. simple drawing...didnt have the letter index bd etc

How do I fix error 8? Please help me.

Thank you for this lesson. I really like all your lessons. I am new to laser work and am using a diode laser. I will be making a custom card for my little brothers (70) birthday with an old pic of us as kids.

You showed that the plywood did not cut through totally with 1 pass. Could you have added a pass or is "1 pass" not changeable? There is a 40W WeCreate available. Would you recommend that instead of the 20W? It may be pre-order so not yet available for review. Also, what is the title and singer that you play in the background? Thanks, Gary Linn

I'm leaning towards the 20W due to the smaller focal spot for detailed engraving. Do you think I should go with the 30W. I'm planning mostly doing custom wood work engraving and will venture into mugs. I'm also considering this for cutting templates for some wood projects I have. I just don't have any experience on how much the difference in focal size makes. This will be my first laser. Love your channel and subscribed immediately when I saw the "guns out when the lasers out" tank :)

As always, thanks, Rich

Wow thank you teacher! I told you I was going to be you best follower lol

You seem to forget to mention your overhead such as electricity costs and such it takes 7 different electrical items to run my laser plus lighting and heat and cooling when needed

Love your new theme songs!

has anyone put this head on a co2 laser?

I feel frustrated not finding simple informations. I just bought Omtech polar 50w . But thank you again for your videos. Now I have to keep watching all of your videos😂

I have a lot of designs in my computer I use them for T-shirt etc how can I vectorize a design for free to use it for engraving. By the way I am becoming your teacher´s pet

Wow what a great tutorial. I am so new and this has been the best one I have seen. Thank you I started following you

I cant get the Boolean subtract to work, I am making identical boxes, the weld works. Sometimes the Boolean tool will remove 1 tab then if i get it again, it removes the box itself and leaves the tabs.

I got mine today, it was delivered next door. FEDEX always delivers my stuff next door, but the wife's stuff comes to the house. Go figure. Had to use my dolly to get it, it's big and heavy.

Thanks so much for your videos regarding Roly Automation. Until 3 days ago I had never heard of them and was about to buy an XTOOL S1. Now I am going for the Lasermatic Mk 2 30 watt. I’m only a retired hobbyist but I’m sure it’s going to be 👍

Thanks for the video! From the time you ordered, how long did it take for you to receive the whole laser?

The video show the working area as 410x390, is that correct for the XW?

Liked the review, decided to go order one. They also make a 72X24 which is what I'm trying order. ISP is causing me issues. Also, the promo code didn't work, but I need the bench regardless.

*If this is your very first laser,* you would also have to install the CH341SER driver from the USB drive. Just double click the file and it will install.

Hello ,this MK2 mean that machine have makerbase motherboard?